SG6
Signal generator & calibrator
SG6 is an intelligent signal calibrator with high-precision measurement calibration and signal generator in one . It can simultaneously output / measure multiple electrical signals, and supports a variety of communication modes, such as RS485 bus, HART, Wi-Fi, BT, GPRS, GPS, Compass, etc., with functionality, practicality, convenience.
With six working modes of measuring, generation, calibration, logging, communication, file, it means SG6 is not only a calibrator, but also a perfect combination of digital multimeter, signal generator, data logger, field communicator and file manager. With such a multifunctional machine for easy operation, paperless calibration and file management,SG6 makes your work more efficient and accurate.
- Measurement
- Generation
- Interface
- General
| Voltage measurement | |
| Measuring range 1 | -1~1V |
| Resolution | 1μV |
| Accuracy | ±3μV |
| Measuring range 2 | -10~10V |
| Resolution | 0.01mV |
| Accuracy | ±0.2mV |
| Input impedance | > 2MΩ |
| Support units | V, mV, μV |
| Resistor measurement | |
| Measuring range | 0~2000Ω |
| Resolution | 0.001Ω |
| Accuracy | ±0.005Ω |
| Measuring current | 0.5mA, 1mA |
| Support units | Ω,KΩ |
| 4 Wires | The same to measuring specification |
| 3 Wires | Add 10mΩ |
| Digital decoding | |
| Type | 7/8 bit Gray Code |
| Electrical level | 5V, 12V |
| Trigger | Effective for high or low electrical level |
| Current measurement | |
| Measuring range | 4~20mA |
| Resolution | 1μA |
| Accuracy | ±5μA |
| Input impedance | < 10Ω |
| Support units | mA, μA |
| Loop supply | Internal supply 24V±10%（max 55mA）/ External 60VDC（max） |
| Frequence measurement | |
| Measuring Range | 0~100KHz |
| Resolution | 0.001Hz |
| Accuracy | ±0.01Hz |
| Input impedance | > 1MΩ |
| Support units | Hz, KHz |
| Pulse measurement | |
| Measuring Range | 0~99999 |
| Resolution | 1 pulse |
| Accuracy | 1 pulse |
| Input impedance | > 1MΩ |
| Trigger level | Dry contact, wet contact ( Trigger level 2.0V ) |
| Voltage generation | |
| Measuring range 1 | -20~90mV |
| Resolution | 2μV |
| Accuracy | ±5μV |
| Measuring range 2 | -1~10V |
| Resolution | 0.2mV |
| Accuracy | ±0.5mV |
| Maximum load current | 5mA |
| Short circult current | > 100mA |
| Load effect | < 50μV / mA |
| Support units | V, mV, μV |
| Resistor generation | |
| Measuring range 1 | 0~200Ω |
| Resolution | 0.005Ω |
| Accuracy | ±0.01Ω |
| Measuring range 2 | 0~2000Ω |
| Resolution | 0.05Ω |
| Accuracy | ±0.1Ω |
| Stable time | < 1ms |
| Support units | Ω, KΩ |
| Digital encoding | |
| Type | 7/8 bit Gray Code |
| Electrical level | 5V, 12V |
| Trigger | Effective for high or low electrical level |
| Current generation | |
| Measuring Range | 4~20mA |
| Resolution | 1μA |
| Accuracy | ±5μA |
| Internal loop supply | 24V±5%, Max 55mA |
| Internal power supply maximum load | 24V /（Current generation）20mA when1140Ω, 50mA when 430Ω |
| External loop | The maximum voltage supply 60VDC |
| Support units | mA, μA |
| Frequence generation | |
| Measuring range | 0~100KHz |
| Resolution | 0.001Hz |
| Accuracy | ±0.01Hz |
| Maximum load current | 10mA |
| Waveform | The positive direction of wave |
| Amplitude accuracy | < 5% Waveform |
| Support units | Hz, KHz |
| Pulse generation | |
| Measuring range | 0~9999999 |
| Resolution | 1 pulse |
| Accuracy | 1 pulse |
| Maximum load current | 10mA |
| Specification | |
| Wi-Fi | 802.11a / b / g / n, 2.4GHz |
| Bluetooth | BT2.0 / BT4.0 |
| GPS | L1 band, C / A code |
| USB | Double USB port, type A, type B |
| LAN | IEEE802.3 standard, 10Mbit / s、100Mbit / s |
| RS232 / 485 | The highest transmission rate is 115200bps, which supports Modbus |
| HART | Data transmission rate 1.2Kbps |
| CAN | The highest rate of transmission 1Mbps |
| Specification | |
| Display | 7 inch 800×480 TFT LCD display |
| Touch panel | Capacitive touch screen |
| Backlight | LED backlight, brightness adjustable |
| Key | Power key, Back key, OK key, Four direction key |
| Battery type | Rechargeable lithium-ion polymer, 2600 mAh, 7.4V × 2, Support hot plug |
| Charging time | About 4 hours |
| Battery lifetime | 8~12 hours |
| External supply | 12VDC, 4A |
| Working temperature | 10~40℃ |
| Working humidity | 10%~95%RH（No condensation） |
| Storage temperature | -20~70℃ |
| Preheating time | 5 minutes after power on, meet the technical specification requirements |
| Reading refresh frequency | 0.5s |
| Logging inerval | 1 seconds~24 hours |
| Data recording time | According to the storage capacity, data can be exported |
| Internal storage | 1G |
| External storage | Support SD / SDHC card , max 32G |
| Alarm | High and low limit , calibration cycle overrun alarm |
| EMC | EN50081-1 Class B , EN50082-1 Class B |
| ESD Protection | ±25KV |
| IP Class | IP64 |
| Weight | 1.2kg |
| Dimensions | 255×195×55mm |